General cargo handling considerations
First, minimize the number of trips;
2. Use the handling tools as far as possible;
Article 3. Attention to personal and material safety;
Article 4. The type and identification of materials should not be confused by carrying;

Article 5 different materials shall be transported in different ways.

Methods:
1. Before moving s, the weight and size of the should be estimated, and it is better to carry them in other ways when it is too heavy and not convenient for manual handling.
2. Before moving s, it is best to take protective measures, such as gloves, masks, overalls, hard hats, etc.
3. When carrying s, check whether the s have nails, films, and whether the parts are loose, so as not to cause damage.
4. Use the palm of the hand to hold the tightly. You can not use your finger to grasp the , so as to avoid the slide of the .
5. When carrying, step should be steady, walk carefully, to prevent slip or trip.
6. When placing s, be careful not to bump them and to prevent damage.

7. s that have marked method should be placed according to the labeling method, which can be inverted. Meanwhile, the material label of the should be made out for easy reading and identification.

Cautions for handling dangerous goods

Before the first handling, safety management department should according to the nature of the loading and unloading of dangerous goods and work environment, to develop safety protective measures, to the operation department issued notice of security considerations, in the absence of the implementation of safety measures, shall not be arranged.

Article 2 before the loading and unloading of dangerous goods, the necessary ventilation and cleaning shall be carried out to the vehicles and vessels. After loading and unloading, no residue shall be left, and the car, like the one with the highly toxic substances, must be cleaned after unloading.

Article 3 when loading and unloading of dangerous goods must be by a trained instructor for dangerous goods loading and unloading of crew and loading and unloading, operation department must be according to the requirements stated in the notice of handling security considerations of safety work, save enough effective protective appliance, ban illegal operations.

Article 4 of the dangerous goods handling personnel should be according to the nature of the dangerous goods shipment to wear appropriate protective equipment, loading and unloading must be light light discharge, prevent bump, weight, drag and dumping, shall not be damaged packaging container, and pay attention to sign, err on the side of pile up correctly. Article 5. It is strictly forbidden to ship, load and ship the damaged goods.

Article 6 the shipment of explosives, highly toxic, radioactive, flammable liquids and combustible gases must be used in the use of transport vehicles that meet the safety requirements. It is forbidden to carry out explosive articles such as electric vehicles, tipper cars, bicycles, etc. Forklift trucks, forklifts and other dangerous goods such as inflammable and explosive liquefied gases are prohibited.

Article 7 chemical dangerous goods that are in conflict with the chemical nature, protection or strict fire shall not contravene the limitation of loading and loading.

Article 8 the work and protective articles for the loading and unloading of toxic substances and radioactive articles shall be dedicated to the special purpose, and all tools used for loading and unloading of dangerous goods shall be cleaned and safeguarded after completion of the work.